Settings Interface

General

Boot Auto-start

When enabled, the software will automatically start when the computer boots up.

Auto-start Solution

Select the solution to auto-start.

Language

Switch software language. Currently supports Chinese, English, Japanese, and Korean.

Auto Set Time (Smart Camera)

System time calibration function, automatically set time is enabled by default. When users open the software interface in a browser, the system will automatically synchronize the current browser time to the smart camera system time. When the local system time is inaccurate, users can also manually set the date and time.

FTP Data Transmission

Remote Server IP

Set the remote server IP address.

Port Number

Set the remote server port number.

Username

Set the remote server username.

Password

Set the remote server password.

Enable Connection

Set the remote server transmission path.

Sync Data

Can choose to sync production data, camera data, runtime screenshots.

FTP Service Path

Set the FTP service transmission path.

Delete Local Data

Whether to delete local data after files are uploaded to the FTP server.

FTP Data Transmission

FTP data transmission will be automatically enabled after connection is established.

Software Authorization (Smart Camera)

Download Certificate

Download the current device’s RAC file.

Upload Certificate

Upload the encrypted RAU file.

File Storage

Production Record Information (GB)

Set the maximum capacity of the production record folder. Files exceeding this limit will automatically delete the earliest files.

Camera Raw Data (GB)

Data saving method has three options: save all data, save only OK data, save only NG data. Data will be stored in OK and NG folders created separately under the solution directory according to type, where NG data represents data where ATOM did not return data or motion planning had no results. After exceeding the set storage maximum capacity limit, it will automatically find and delete the earliest files.

Runtime Screenshots (MB)

Data saving method has three options: save all data, save only OK data, save only NG data. Data will be stored in OK and NG folders created separately under the solution directory according to type, where NG data represents data where ATOM did not return data or motion planning had no results. After exceeding the set storage maximum capacity limit, it will automatically find and delete the earliest files.