Epic Eye Laser L V2S
Safety Instructions
Safety Statement
-
Before using this product, please read the product manual and correctly understand the safety information. Failure to comply with the safety instructions may result in equipment damage or serious injury or death.
-
Transfer will not be liable for any legal responsibility for personal safety accidents or property losses caused by non-compliance with this manual or improper operation of the product.
Precautions
-
Avoid using the camera in dusty environments, areas with strong electromagnetic interference, direct strong light exposure, or environments outside the specified temperature and humidity range.
-
Do not look directly at the projection beam while the camera is operating to avoid eye damage.
-
Ensure the camera window is clean. Use a dust-free cloth for cleaning if needed.
-
Do not install, disassemble, or clean the camera while it is powered on.
-
Avoid severe impact or dropping during transportation and installation.
-
If any abnormal conditions are detected (such as unusual noise, odor, or smoke), immediately cut off the power and inspect.
-
Modification of the camera and its power cable is strictly prohibited.
Package Contents
When unpacking, please check if the camera and its accessories have any damage, rust, or impact marks, and verify that all items match the package contents list. If any damage, rust, impact marks are found on the camera or its accessories, or if the actual items do not match the package contents list, please contact Transfer.
Technical Specifications
Technical Parameters
System Parameters |
Baseline Length |
400mm |
Recommended Working Distance |
1200mm~3000mm |
|
Optimal Working Distance |
2100mm |
|
Near Field of View |
1120mm×1030mm@1.2m |
|
Far Field of View |
2800mm×2625mm@3.0m |
|
Z-axis Accuracy |
0.15mm@2.4m |
|
Pixel Count |
8 million, 2 million |
|
VDI/VDE Measurement Accuracy |
0.32@2.4m |
|
Resolution |
2840×2840, 1420×1420 |
|
Accuracy Error |
<0.15% |
|
Typical Acquisition Time |
0.4s~1.4s |
|
Power Supply |
24V ⎓ 5A |
|
Peak Power |
34W |
|
Average Power Consumption |
16W |
|
Standby Power Consumption |
12W |
|
Hardware Parameters |
Dimensions(L*W*H) |
495mm×115mm×100mm |
Installation Method |
Fixed Installation |
|
Communication Interface |
Gigabit Ethernet |
|
Light Source |
Blue (450nm) Laser |
|
2D Camera |
Monochrome |
|
Environmental Parameters |
Operating Temperature Range |
-10℃~45℃ |
Operating Humidity |
20%~90% RH No Condensation |
|
Protection Rating |
IP65 |
|
Cooling Method |
Passive |
|
Weight |
3.77kg |
|
Storage Temperature |
-20℃~70℃ |
|
Storage Humidity |
20%~90% RH No Condensation |
Subject to change without notice!
Installation and Connection
Camera Installation
|
Mounting Camera to Bracket
|
Cable Connection
Connection Notes
-
Do not connect or disconnect while powered on. Ensure all cables are connected before powering on.
-
Align plugs with sockets before slowly tightening, avoid excessive force when connecting or disconnecting.
-
Use cable ties to secure camera network cable, power adapter, and power cord.
-
When using a router, insert all network cables into the router’s LAN ports.
-
When using a router or switch, it is recommended to use Gigabit router, Gigabit switch, and Gigabit RJ45 cables.
Connection Methods
-
Direct Connection between Camera and Industrial PC
-
Industrial PC; 2. Camera Network Cable; 3. Camera; 4. M8-4Pin-10m DC Power Cable; 5. Rail Power Supply; 6. Robot
-
-
Connection between Camera and Industrial PC via Switch
-
Industrial PC; 2. Network Cable; 3. Switch; 4. Camera Network Cable; 5. Camera; 6. M8-4Pin-10m DC Power Cable; 7. Rail Power Supply; 8. Robot
-
Calibration Board Installation
|
Maintenance
Regular maintenance is crucial for ensuring stable operation and measurement accuracy of the industrial 3D camera hardware. It not only extends equipment lifespan but also helps identify and prevent potential issues, reducing failure rates and ensuring continuous stable operation of the production line. Please strictly follow maintenance procedures and maintain relevant records.
Daily Inspection
-
Check power supply status, regularly inspect power cable connector contact, ensure stable power voltage output meeting power supply specifications. Consider using UPS for power backup to prevent unexpected power outages.
-
Check network connection stability, ensure network transmission rate meets requirements.
-
Monitor working environment temperature and humidity, ensure good ventilation for proper camera cooling.
-
Inspect camera housing integrity, ensure no damage, deformation, or corrosion, avoid potential scraping or collision risks with environmental objects.
-
Check camera mounting and adapter tightness, ensure no deformation, looseness, or wobbling.
-
Check cable connector stress, ensure proper cable routing without excessive bending, no aging or cracking of outer sheath.
Regular Cleaning
Regularly clean the camera to ensure lens cleanliness, free from obvious dust and stains. Use a clean soft cloth to clean the camera body, and a clean soft lint-free cloth with lens cleaner or glass cleaner to clean the camera lens, avoiding lens scratches.
Precautions
-
Power must be disconnected before maintenance to prevent laser radiation exposure.
-
Do not use alcohol or other corrosive cleaning agents.
Storage and Transportation
-
Use original packaging or professional shock-proof case for storage and transportation.
-
Ensure storage environment temperature and humidity meet standards.
-
Avoid severe vibration and impact, keep away from strong magnetic fields.
-
Maintain correct orientation, avoid direct exposure to strong light sources like sunlight.
-
Perform thorough cleaning before long-term storage, conduct regular power-on checks (every 3 months).
Fault Prevention and Repair
Fault Prevention
-
Establish equipment maintenance records, document all maintenance operations and abnormal conditions.
-
Regularly check camera internal parameters, recalibrate when necessary.
Equipment Repair
Unauthorized disassembly or repair of this equipment is strictly prohibited to prevent laser radiation and equipment damage. In case of malfunction, please immediately contact Transfer technical support for factory repair. Transfer will not be responsible for any damage or accuracy degradation caused by unauthorized disassembly or repair, and any resulting losses shall be borne by the user.
Technical Support Channel
For technical support, please call the official service hotline 4000-191-161, press 3 for technical support according to voice prompts.
Legal and Compliance
Disclaimer
Transfer will not be liable for any legal responsibility for personal safety accidents or property losses caused by user non-compliance with safety regulations, improper operation, or unauthorized modification of the camera or power cables.
